|
|
|
| K D Tools Engine Cylinder Hone 2833 |
|
Hone and remove glaze from engine cylinders from 2" to 7" (51 to 177mm) in diameter. Adjust spring tension for positive cutting action and set diameter with spread limiter. Hone includes medium grit stones No. 240.By K-D Tools.
|
|
$19.00 - $30.00
from 3 stores
|
|
| K-D Tools Kd Tools (2031) Exhaust and Tailpipe Cutter |
|
Features and Benefits:Use this tool to cut pipes 3/4" to 3" (19 to 76mm) in diameterFifteen blades effectively cut pipe so only a 1/4 rotation is needed for a complete cutCutter has a plastisol-dipped handle for comfortServiceable tool works in hard-to-reach areasIt will not cut double-wall pipesKee ...
More
|
|
$28.00 - $31.00
from 3 stores
|
|
| Black & Decker Hex Allen Insert Bit Set 8 Pc |
|
Fits Allen screws. Extra hard to withstand heavy duty use. Includes 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" and 3/16" bit tips. With 1/4" square drive ratchet adapter for driving bit tips with any 1/4" square drive power or hand ratchet. Use with all drills, power ratchets and 1/4" drive cordless sc ...
More
|
|
$10.00 - $35.00
from 3 stores
|
|
| Sk Hand Tools 19768 12 Piece 1/4" & 3/8" Drive Tamper Proof Torx Bit Socket Set |
|
1/4" Drive Tamper-Proof TORX® Bit Sockets - T7, T8, T10, T15, T20, T25, T27, T30; 3/8" Drive Tamper-Proof TORX® Bit Sockets - T40, T45, T50, T55 SuperKrome® finish provides long life and maximum corrosion resistance Through-hole design High strength S2 steel Made in the U.S.A., Manufacturer: SK Hand ...
More
|
|
$72.00 - $77.00
from 1 store
|
|
| Otc 1914 Truck Wheel Bearing Locknut Socket - 4" (6 Pt.) |
|
Socket has a 3/4" square drive opening, permitting the use of an extension and torque wrench to tighten locknut as required. Locknut removal and installation is simple, even when wide-rim wheels are involved, since a long extension may be attached to the socket to provide the necessary clearance. So ...
More
|
|
$23.00 - $26.00
from 3 stores
|
|
| Dewalt 15-Pc. Rapid Load Set |
|
Contains the following: rapid load holder, 1 compact magnetic drive guide. (1) 1/8 In. and (1) 1/4 In. hex shank drill bits, (1) #2 Phillips 2 In. power bit. (1) #2 square recess 2 In. power bit, (1) #1 and (4) #2 Phillips 1 In. insert bit tips. (1) #1 and (2) #2 square recess 1 In. bit tips, #8 ...
More
|
|
$16.00 - $20.00
from 4 stores
|
|
| Best Way Tools Screwdriving Bit Set (24380) |
|
100 pieceSet includes: 1 wing nut driver; 1 magnetic bit holder; 1 socket bit holder; 1 one inch hex extension; 1 two inch hex extension; 3 clutch bits; 3 torx set screw bits; 3 spline bits; 4 tri wing screw bits; 4 square recess bits; 4 spanner bits; 9 slotted bits; 8 Phillips bits; 8 prozi drive s ...
More
|
|
$9.00 - $19.00
from 2 stores
|
|
| Sk 4419 3/8" Drive Spark Plug Socket 9/16" |
|
SuperKrome® finish provides long life and maximum corrosion resistance SureGrip® hex design drives the side of the fastener not the corner Increased length for improved and easier access rubber insert for a secure soft grip on the hex without damaging the spark plug and external hex bolster for extr ...
More
|
|
$6.81 - $11.47
from 2 stores
|
|
